CopyWriter CD/DVD/Blu-Ray Tower Duplicators

Record LightScribe or normal CD-R's, DVD+Rs, or DVD-Rs one at a time or by the thousands with the CopyWriter LightScribe Tower Duplicators. Burn CDs at 48X and DVDs at 22X. When the job completes, turn the Lightscribe discs over and print ten labels all at once with LightScribe's laser-etching technology by HP. Never worry about ink or ribbon costs again!

A built-in 250 GB hard drive allows you to store multiple master disc images and label designs, or extract audio tracks and mix your own discs. The intuitive 8-button panel and multi-line display make copying discs easy for the novice user while keeping all the high-end, power-user features that the most demanding customers have come to expect from Microboards like disc verification mode and adjustable recording speeds. Features don’t mean much without reliability. Quality components and careful assembly – backed by industry leading service – make sure that you’ll be burning discs and printing labels trouble-free for years to come.

 

Configurations Available 1 to 3 Drives 1 to 5 Drives 1 to 7 Drives 1 to 10 Drives	Print Speed	|	Approx 17 - 22 Minutes, full coverage disc, best mode
		|	Approx 2 - 5 minutes, text disc, best mode
	Record Speed	|	CD 48x, DVD 22x
	Hard Drive	|	250 GB HDD for disc image storage
	Connectivity	|	Standalone
	Verification	|	Bit to bit for data modes only
	Track Extraction	|	Yes
	Software	|	LightScribe Label Designer, Zulu2
	Copy Protection	|	5 trial Licence's Included with system

 

CopyLock - DVD Video Protection for Towers

DVD Video copy protection has historically been a complicated and expensive process that was always more trouble than it was worth. The good news is that this is no longer the case with the CopyLock software & Copy Writer CD/DVD Tower bundle. If you link the DVD Tower to your PC you can protect your master using the CopyLock software. The image of your master is then transferred to the CD/DVD Tower. Once it's on the tower you will be able to select the protected Image and make as many copies as you like. You are not limited to the amount of copies. When you buy licenses to protect this is per master and not copies.

If you are producing more than a handful of discs this starts to become a very lost cost, protection solution.

The 6 simple steps to protection

1) Install the supplied CopyLock software onto a suitable PC.
2) Plug in the CopyLock USB dongle with activated licenses into your PC’s USB port.
3) Use the Microboards CopyLock suite of software to create a protected .iso file from your DVD video disc or Video TS folder.
4) Transfer the new copy protected .iso file from the PC onto an enabled duplicator via USB/Copy Connect or LAN/Network connectivity
5) Load blank DVD recordable discs into the duplicator’s writer drives, then use the duplicator’s menu keys to locate the transferred file on the duplicator’s internal hard drive
6) Initiate the copy process.  The finished copied discs will have the copy protection embedded.

One license per master is all that is required to embed your project/title with Handisc's CopyLock protection.  The CopyLock software allows the user to create an unlimited number of copies from each licensed master video image for no additional fees, making the overall cost per copy protected disc as low as just pennies.

 

 

Two Year Back to Base Warranty as Standard!

Handisc offer a range of support levels to ensure peace of mind. To find out more information on advanced warranties and support packages please talk to Handisc's Support Team.

Tel: 01264 335118 or Email: support@handisc.co.uk

Didn't buy your duplicator from Handisc?

Don't worry. We can also support or repair a system that wasn't supplied by Handisc.